Environment Simulation Cycling Lab Equipment
Fast Alternating High-Low Temperature Test Chamber
Benchtop Climatic Chamber Product applications:
Sanwood Bench-top temperature and humidity test chamber is widely used in scientific research, research institutes, quality inspection institutes and other industries to do warm and humid heat tests of electronic and electrical products, materials, parts, equipment, etc., alternating heat test and constant temperature test, etc. Also could do high and low temperature routine tests, low temperature storage, in order to evaluate the performance of the sample under given environmental conditions.
Benchtop Climatic Chamber Product Product Positioning:
Apply to aerospace, aviation, electronics, automotive, battery and other products and quality inspection institutes, research institutes, universities and other test units, providing virtual space to simulate the real environment, verify product inspection, research and development results, test chamber is a powerful assistant to shorten the development cycle and improve product quality and reliability.
Bench-Top Type Temperature (& Humidity) Chamber
Premium features for the ultimate in testing flexibility
Are you looking for the smallest chamber possible to get your testing done? Hate the footprint and noise of other temperature chambers?
Need to closesly integrate other test equipment? These are the Bench-Top Temperature (& Humidity) Chamber for you!
Bench-Top Type Temperature (& Humidity) Chamber Easy to install and own:
The Bench-Top Temperature (& Humidity) Test Chamber are small enough be placed underneath a benchtop, or on top.
Designed for integration with other test equipment to make a complete test stand.
The smaller models run on standard 115V power, enabling easy installation anywhere.
Extremely quiet operation as low as 52 dba, suitable for quiet labs or offices.
Bench-Top Type Temperature (& Humidity) Chamber CHAMBER DESIGN FEATURES:
.Temperature (& Humidity) Chamber Premium design with a space-saving footprint and quiet operation suitable for offices and small labs
.One 1" diameter cable port on the right side (Note: previous model series also included standard port on left)
.One adjustable stainless steel shelf
.Temperature output terminals
Bench-Top Type Temperature (& Humidity) Chamber SAFETY FEATURES:
.Temperature (& Humidity) Chamber Three levels of overheat protection
.Specimen power supply control terminal
Benchtop Climatic Chamber Product technical specification:
| Model | SMC-22-CC |
| Temperature range | -40℃～150℃ |
| Temperature fluctuation | ±0.5℃ |
| Cooling rate | 150.0℃～25.0℃ Cooling rate 2.0～3.0℃/min
25.0℃～-40.0℃ Cooling rate 1.0～2.0℃/min
-40.0℃～60.0℃ Cooling rate0.7～1.5℃/min |
| Heating rate | -60.0℃～150.0℃ Within about 60 minutes 3.0～5.0℃/min |
| Temperature uniformity | ±1.0℃ (-40.0℃～100.0℃) |
| | ±1.5℃ (100.1℃～180.0℃or-40.0℃～-60.0℃) |
| Humidity range | 20.0%RH～98.0%RH |
| Humidity fluctuation | ±1.0% RH |
| Humidity uniformity | ±2.0％RH |
| Internal material | SUS304 stainless steel(1.2mm) |
| External material | cold-rolled plate(1.2mm),powder coating |
| Heat insulation | polyurethane foam(100mm)+glass wool(10mm) |
| Fan | Centrifugal fan(Impeller Fan) |
| Refrigeration compressor | hermetic compressor(Tecumseh) |
| Cooling mode | air cooling |
| Refrigerant | R404A,R23,R508 |
| Evaporator | finned-tube exchanger |
| Heater | nickel chrome strip heater |
| Humidifier | Steam Humidifier |
| Interior(mm) W*H*D | 300 X 300 X 250 22.5L |
| Exterior(mm) W*H*D | 480x835x990 |
| Weight | 95kg |
| Working Temperature | +5 ~ 35℃ |
| Power supply | 220V/AC 50/60Hz 12A |
| Controller | Standard: SANWOOD |
Product Tags:
|
|
Cycling Lab Environmental Test Chamber Fast Alternating Images
|
